UniFi Lab 14 Camera at another property

{"access-port":{"t":"Access port","d":"One VLAN only, untagged. Fine for a printer. Wrong for an AP that serves multiple SSIDs."},"adopt":{"t":"Adopt","d":"Bring a new UniFi device under your UniFi app so you can manage it. Until then it shows Pending Adoption."},"aux":{"t":"AUX","d":"Extra Door Hub relay for a door operator (dry) or a siren or chime (powered 12V). Not for the main lock."},"basic-protection":{"t":"Basic Protection","d":"RAID 5 with 3 or more drives. Protects against 1 drive failing."},"client-isolation":{"t":"Client isolation","d":"WiFi setting that stops guest clients from talking to each other. Keep on for Guest."},"com":{"t":"COM","d":"Common side of the LOCK relay pair. It lands with NC or with NO, not both."},"debug-console":{"t":"Debug Console","d":"Built-in browser shell on the console."},"device-bridge":{"t":"Device Bridge","d":"A pair of UniFi radios that replaces a network cable between two buildings or spots."},"device-ssh-settings":{"t":"Device SSH Settings","d":"Network setting holding the SSH login an adopted device uses. Factory default devices use ui / ui."},"dhcp-option-43":{"t":"DHCP Option 43","d":"DHCP option that hands devices the Network host address so they adopt across VLANs."},"door-attendant-receiver":{"t":"Door Attendant / receiver","d":"User assigned to get the door call. Not on the list means no Unlock for that door."},"door-hub":{"t":"Door Hub","d":"The Access controller at the door. It wires the lock, door sensor, exit button and reader."},"door-position-sensor-dps":{"t":"Door position sensor (DPS)","d":"A contact on the door and frame that tells the hub whether the door is open or closed."},"dry":{"t":"DRY","d":"LOCK mode with no power from the hub. An outside supply can run a non-12V lock, up to 30V DC at 1 A."},"factory-reset":{"t":"Factory reset","d":"Clears the camera so it isn't adopted anywhere."},"fail-safe":{"t":"Fail-safe","d":"A lock that needs power to stay locked, like a maglock. Wire it to LOCK NC and COM."},"fail-secure":{"t":"Fail-secure","d":"A lock that needs power to unlock, like most strikes. Wire it to LOCK NO and COM."},"flex-budget":{"t":"Flex budget","d":"USW-Flex downstream totals by input: AF 8W, AT 20W, BT or 60W injector 46W (set Power Source to PoE Injector)."},"free-egress":{"t":"Free egress","d":"Leaving without badging out."},"gateway-zone":{"t":"Gateway zone","d":"The router itself, which answers DHCP and DNS. Block a network's zone from the Gateway and its clients get no IP or DNS."},"high-quality-period":{"t":"High-quality period","d":"Recent footage stays full quality. Older footage is kept at low quality."},"hot-swap":{"t":"Hot swap","d":"Replace a drive while the UNVR stays on."},"inform":{"t":"Inform","d":"Device check-in URL to the Network application, usually controller host on port 8080, path /inform."},"injector":{"t":"Injector","d":"A box that adds PoE power to a cable. Too weak a class, like an AF injector on a loaded Flex, is a common field mistake."},"isolate-spokes":{"t":"Isolate Spokes","d":"Site Magic Hub and Spoke setting. Each spoke site reaches the hub but not the other spokes."},"line-of-sight":{"t":"Line of sight","d":"A clear straight path between the two bridge ends, with no roof, wall, or trees in the way."},"lock":{"t":"LOCK","d":"The Door Hub's main lock relay, with NO, NC and COM terminals. Set it to POWERED for 12V from the hub, or DRY for no power."},"managed-by-other":{"t":"Managed by Other","d":"Devices list state. Another instance of UniFi Network owns the device, including the same console after a factory restore. Fix: restore a backup, factory reset and re-adopt, or reassign in the mobile app."},"max-draw":{"t":"Max draw","d":"The most watts a device can pull, from its datasheet (IR on, at boot). UniFi PoE budgets use this, not the quieter live reading."},"mdns-proxy":{"t":"mDNS Proxy","d":"Gateway setting that passes device discovery between networks, so a phone on one VLAN can find a TV or printer on another. Auto, or Custom with the networks you pick."},"mesh":{"t":"Mesh","d":"Site Magic layout where every site links straight to every other site. It can't NAT overlapping subnets."},"native-vlan":{"t":"Native VLAN","d":"The untagged VLAN on a switch port. UniFi device management usually rides here. Set as Native VLAN in Port Manager."},"nc-com":{"t":"NC/COM","d":"Fail-safe pair. Unlock opens the relay and drops power so a maglock releases."},"no-com":{"t":"NO/COM","d":"Fail-secure pair. Unlock closes the relay and applies power so a strike unlocks."},"passive-poe":{"t":"Passive PoE","d":"Power sent on the cable with no handshake. It's always on when enabled, so only plug in devices made for it."},"pending-adoption":{"t":"Pending Adoption","d":"Devices list state for a device that has checked in and is waiting for you to click Adopt."},"poe-plus":{"t":"PoE+","d":"802.3at. Up to 25.5W to the device."},"poe-plus-plus":{"t":"PoE++","d":"802.3bt Type 3. Up to 51W to the device."},"poe-availability":{"t":"PoE Availability","d":"The total PoE power the switch can share across its ports."},"poe-budget":{"t":"PoE budget","d":"Every device's max draw added up, compared with what the switch or injector can supply. Go over it and devices lose power."},"poe-class":{"t":"PoE class","d":"AF (about 15W), AT (about 30W), BT / PoE++ (higher). UniFi budgets on documented max draw, not quiet daytime watts."},"poe-output":{"t":"PoE output","d":"A port on the UDB-Pro that powers a PoE device, here the camera. It only runs with PoE+ coming in."},"point-to-multipoint":{"t":"Point to multipoint","d":"One radio serving many bridges at once, like the UDB-Pro-Sector."},"powered":{"t":"POWERED","d":"LOCK power from the hub: 12V DC, up to 1 A. Do not add a second 12V supply."},"recording-destination":{"t":"Recording destination","d":"The NVR the camera records to. Picked on the phone during adoption."},"recording-retention":{"t":"Recording Retention","d":"A limit on how long recordings are kept. Not a promise."},"remote-unlock-via-endpoint":{"t":"Remote Unlock via Endpoint","d":"Access setting. When off, Endpoint receivers can talk on a call but cannot unlock."},"repair":{"t":"Repair","d":"Rebuilds the protected storage onto the new drive. Things run slower until it finishes."},"request-to-exit-rex":{"t":"Request to exit (REX)","d":"A button, motion sensor, or panic bar that unlocks the door from the inside without a credential."},"set-inform":{"t":"set-inform","d":"Device SSH command that tells a UniFi device where its Network host is, e.g. http://192.168.1.10:8080/inform."},"stun":{"t":"STUN","d":"UDP 3478 helper for remote adoption and remote management. Not the adoption path itself: adoption needs TCP 8080 to the Network host."},"super-encoding":{"t":"Super Encoding","d":"Makes each day of recording smaller."},"tagged-vlan-management":{"t":"Tagged VLAN Management","d":"Port setting for which VLANs ride tagged (802.1Q): Allow All, Block All, or Custom. Guest and IoT SSIDs need their VLANs tagged on the AP uplink."},"teleport-adoption":{"t":"Teleport Adoption","d":"Adopts a camera at another location to the NVR at the main house over the internet. No VPN, no port forwarding."},"trigger-level":{"t":"Trigger level","d":"Which contact state counts as active. Open active (NC) or close active (NO)."},"trunk":{"t":"Trunk","d":"A port carrying the Native VLAN plus tagged VLANs. The right setup from switch to AP, or switch to gateway, when there are several networks."},"unauthorized-opening":{"t":"Unauthorized Opening","d":"Access status when the door opens while it's locked."},"unifi-endpoint":{"t":"UniFi Endpoint","d":"The phone app path for Access calls. Remote Unlock via Endpoint turns unlock on or off for that path."},"zbf":{"t":"ZBF","d":"Zone-Based Firewall. Rules are set between zones, like Internal, External, Gateway and Hotspot, plus custom zones such as IoT."}}